To make a smaller filter coffee, change both the dry coffee dose and the brewing water by the same factor. Changing only the water changes the ratio. The worked example below is arithmetic, not a promise of identical taste or a new tested Crema recipe.
Write down the starting quantities
Choose a complete recipe and identify the dry coffee and the total brewing water. Crema’s public V60 page lists 15 g coffee and 250 ml water. Keep the unit beside each number. Rinsing water is separate. The volume of the drink collected in the cup is also a separate measurement, not a substitute for the recipe’s water input.
Choose the quantity you want to scale
For this calculation, choose 200 ml of brewing water instead of 250 ml. Divide the new amount by the original: 200 ÷ 250 = 0.8. This is the multiplier for both ingredients. It describes the water going into the brew, not a guarantee of a 200 ml finished drink.
Apply the same multiplier to coffee
Multiply the original coffee by 0.8: 15 g × 0.8 = 12 g. Multiply the water too: 250 ml × 0.8 = 200 ml. Write the pair together as 12 g coffee / 200 ml brewing water. If you leave coffee at 15 g while reducing only water to 200 ml, you have deliberately chosen a different ratio.
Do not scale every instruction mechanically
A multiplier for ingredients does not automatically give a new grinding setting, water temperature or finishing time. Keep the brewer’s operating instructions and capacity limits in view. A very small dose may not suit the same equipment. If the result falls outside the intended range, choose a suitable complete recipe instead of forcing the arithmetic onto the brewer.
Keep a transparent note of the change
Label the result “calculated starting quantities”. Record the original recipe, factor, coffee, water and any rounding your measuring tools require. If a scale measures grams, keep that mass unit in a mass-based adaptation; do not silently relabel its reading as millilitres. For example, applying 0.8 to a separate 15 g / 250 g recipe gives 12 g / 200 g.
Evaluate one actual brew
Use the smaller quantities as an experiment, record the actual brewing time and write a brief taste note. Keep those observations separate from the calculation. If you adjust the grind next time, retain your recorded quantities so the change remains understandable. Explore Crema’s public recipes for complete methods; the equation alone does not replace their preparation steps.